掩埋式多模干涉型分束器的反射性能

通过束传播方法(BPM)模拟了SiO2基掩埋式波导结构多模干涉(MMI)型分束器的反射性能,模拟结果表明,MMI工作在分束模式时存在最优的多模干涉长度实现最大输出和最小反射,而在合束模式下实现最大输出时反射也达到最大,这是由自映象原理决定的。SiO2基掩埋式波导结构MMI分束器对反射具有良好的抑制作用,其最大反射功率为-60dB。分析表明,多模干涉区末端的界面反射率决定了器件的反射强弱,SiO2基掩埋式波导的界面反射率非常低,这是其低反射的原因。     

Growth studies of m-GaN layers on LiAlO2 by MOCVD

This paper reports that the m-plane GaN layer is grown on （200）-plane LiAlO2 substrate by metal-organic chemical wpour deposition （MOCVD） method. Tetragonal-shaped crystallites appear at the smooth surface. Raman measurement illuminates the compressive stress in the layer which is released with increasing the layer＇s thickness. The high transmittance （80%）, sharp band edge and excitonic absorption peak show that the GaN layer has good optical quality. The donor acceptor pair emission peak located at -3.41 eV with full-width at half maximum of 120 meV and no yellow peaks in the photoluminescence spectra partially show that no Li incorporated into GaN layer from the LiAlO2 substrate.     

基于LabVIEW空间瞬态光信号处理技术

分析了待探测的瞬态光信号、背景光信号和高频干扰信号频率的特性,利用LabVIEW软件平台设计虚拟仪器，进行信号处理和分析.设计了数字滤波器，对采集到的信号进行数字滤波，对滤波后的目标信号进行谱估计，得到功率谱密度.试验结果表明，该方法设计简单，运行可靠，滤波效果显著.     

基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

不同入射角度下强流脉冲电子束能量沉积剖面和束流传输系数模拟计算

 强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大，理论计算了0.5~2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数，并且还计算了0.4~1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数。计算结果表明，随着入射角的增大，靶材表面层单位质量中沉积的能量增大，电子在靶材料中穿透深度减小，能量沉积系数减小，相应的束流传输系数也减小；能量为0.5~2.0MeV的电子束当入射角在60°~70°时在材料表面层单位质量中沉积的能量较大。     

Research of spatial resolution in external electro-optic probing

A new method, based on zero point of longitudinal electric field, was used to determine the spatial resolution of external electro-optic (EO) probing equipment. Considering the diffraction of Gauss beam, the result of external EO probing was simulated which was in accordance with the experiment. A spatial resolution <1 μm was demonstrated initially in our equipment using 650 nm laser diode as probe beam and semi-insulating GaP as probe tip.     

High photosensitivity in cis-polyphenylacetylene films irradiated with 60Co γ-ray

This paper reports that ⁶⁰Co γ-ray irradiation can convert cis-polyphenylacetylene (cis-PPA) films prepared with rare-earth coordination catalysts to highly photosensitive materials. The dependence of the photosensitivity on irradiation dose, preparation methods, and microstructure of the PPA films has been investigated by means of a potential discharge technique. The photosensitivity was enhanced with increasing irradiation dose. The critical dose to produce a light response was 5 × 10³ Gy. The maximum surface potential discharge rate was 618 V/s, and the dark decay was approximately 2 V/s for cis-PPA films irradiated with ⁶⁰Co γ-ray (dose: 2 × 10⁵ Gy). The cis-transoidal-PPA and an electrophotographic photoreceptor device incorporating cis-PPA showed a higher irradiation effect. The structure and properties of ⁶⁰Co γ-ray irradiated rare-earth PPA films are similar to the unirradiated films.     

T 1 theorem for Besov spaces on nonhomogeneous spaces

Suppose μ is a Radon measure on ℝ ^d , which may be non doubling. The only condition assumed on μ is a growth condition, namely, there is a constant C₀>0 such that for all x∈supp(μ) and r>0, μ(B(x, r))⪯C₀rⁿ, where 0<n⪯d. We prove T1 theorem for non doubling measures with weak kernel conditions. Our approach yields new results for kernels satisfying weakened regularity conditions, while recovering previously known Tolsa’s results. We also prove T1 theorem for Besov spaces on nonhomogeneous spaces with weak kernel conditions given in [7].     

Ternary univariate curvature-preserving subdivision

We present an interpolating, univariate subdivision scheme which preserves the discrete curvature and tangent direction at each step of subdivision. Since the polygon have a geometric information of some original (in some sense) curve as a discrete curvature, we can expect that the limit curve has the same curvature at each vertex as the control polygon. We estimate the curvature bound of odd vertices and give an error estimate for restoring a curve from sampled vertices on curves.     

加权二次有理Bézier插值曲线

在本文中,给定一组有序空间数据点列及每个数据点的切矢向量,利用加权二次有理Bézier曲线对数据点作插值曲线,使该曲线具有C1连续性,并且权因子只是对相应顶点曲线附近产生影响,同调整两个相邻的权因子可以调整这两个相邻顶点之间的曲线和它的控制多边形.